Landing Gear & Battery Installtion
Electronic Hook & Loop
(Box 2/Bag 4)
OXY0242-Right
Landing Gear
(Box 1/Bag 10)
OXY0237-Bottom
Landing Gear
(Box 1/Bag 10)
Main Blades Installation
M2x10 Button
Head Screw
190 mm Carbon
Plastic Main Blade
(Box 3/Bag 2)
Note: The Oxy Main Grips have a 3.2mm root cavity
in order to work with any standard 190 / 210 main
blade root.
page 31
Chapter 17: Landing Gear & Battery Installtion
4x M2x8
Self Tapping Screw
Satellite
OXY0241-Left
EX
Landing Gear
(Box 1/Bag 10)
Tail Blades Installation
Plastic Tail Blade
38 or 41mm
(Box 1/Bag 7)
M1.6x8 Hex
Cup Screw
Oxy tail blade dimension note: In order to assure
the best performance Oxy made a custom tail
blade with a 3mm root. If you use different tail
blades with a 2.5mm root you must use shims (not
included).
Information about 38 and 41mm tail blades: In the
kit we include two sets of tail blades - the 38mm are
designed for high head speed, the 41mm are designed
for low head speed. We recommends using 38mm
when head speed is higher than 4000rpm.
Important Note: Use both double sided Hook
and Loop Velcro and the included battery
straps to fully secure the battery pack.
4x M2x8 Self Tapping Screw
don't over tighten