Chapter 5, Tail Assembly - Oxy Heli oxy3 Instruction Manual

Tail Pitch Slider Assembly. (Box 02 / Bag 1)
Step 1
OXY0061
Tail Pitch Slider Ring
2 X OXY0139
Shim 7x8x0.1
OXY0060
Tail Slider Bushing
Important Note:
This part, for tuning reason
come factory pre assembled
with grease and loctite. Ready
to use.
Tail Grip Assembly. (CNC components)
2 x MR63-W2
Radial Bearing 3X6X2
Tail Hub Assembly. (CNC components)
SCM3X3
Set Screw
M3X3
2 x OXY0050
Linkage Ball
4 X 3 M2
Page 5
OXY0063
Tail Pitch Slider
Half Moon
2 x MF74-ZZ
Flange Bearings
4x7x2.5
Thrust Washer(Larger ID)
OXY0053
Washer 4.2X6X0.2
OXY0054
3x4x0. 1 Shim Washer
OXY0049
Tail Hub
2 x OXY0051
Tail Grip
OXY0054
3x4x0. 1 Shim Washer
Note: each side
of the the hub
OR-2X1
O-RING ID 2 - W1
Note: each side
of the hub
Step 2
2 x OXY0064
Link Control
Assure lock thread don't
contaminate the bushing
sliding. In case of friction
reassembly after cleaning.
F3-6G-W3.5
Thrust Bearing 3x6 W3.5
Thrust Washer(Smaller ID)
Important Note:
This part, for tuning reason
come factory pre assembled
with grease and loctite. Ready
to use.
2 x OXY0055
Shim Washer
2X3.5 W 0.5
2 x TCEM2X5
Hex Cap Screw
M2X5

Chapter 5, Tail Assembly

2 x Bushing
2 X 3 H2
2 x TBEM2X5
Button Hex Cap
Screw M2X5
Important Note:
This part come pre assembled
without lock thread for quality
reason. Follow instruction per
final assembly.
Important Note:
This part come pre assembled
without lock thread for quality
reason. Follow instruction per
final assembly.