Oxy Heli oxy2 Instruction Manual page 10

Carbon Fiber Tail Push Rod Assembly
(Box 3/Bag 1)
REF 1mm
OXY0584-STD Tail Push Rod
Important Note:
This part, for tuning reasons,
comes factory pre assembly,
it ready to use.
Tail Push Rod Guide Assembly
(Box 3/Bag 1)
Step 1:
Note: to install this
pin screw rotate
counter clock wire.
2 x OXY0539-
Pin Screw
OXY0067
Guide Push Rod
Step 3:
Push the part inside the
boom sockets as shown.
OXY0578 - Tail Boom STD
Important Note:
This part, for tuning reasons,
comes factory pre assembly,
it ready to use.
page 10
OXY0536-Al Tail Push
Rod Terminal
Step 2:
Note Pin Screw Thread:
Oxy designed the Pin Screw with
a counter clockwise thread. This
will help on the final locking
operation. Be careful to follow our
instructions to get a perfect assembly.
Step 4:
Slide the parts as shown
Chapter 6: Tail Assembly
OXY0519-Threaded
Rod M1.4X7mm
OXY0526-Plastic
Linkage Ball 3mm
Note: Install the Pin Screw
and leavea gap as shown.
Step 5:
In order to lock the tail push rod
support, use a Flat Screw Driver
and turn clockwise. Do not
over tighten.