Maintenance; How To Clean - Fluke VT02 User Manual

VT02, VT04A, VT04
Users Manual

Maintenance

Maintenance is not necessary for this Product.
To prevent possible electrical shock, fire, or personal injury, use
only specified replacement parts.
To prevent damage to the Product, do not leave the camera
exposed to a heat source or high-temperature environments,
such as an unattended vehicle in the sun.

How to Clean

Clean the case with a damp cloth and a weak soap solution. Do not use
abrasives, isopropyl alcohol, or solvents to clean the case or lens/window. If
used and stored properly, the infrared lens on your Product should require only
occasional cleaning.
When necessary, to clean the lens:
1. Use a hand-squeeze air pump to gently blow off any dust or debris from
the lens surface.
2. If the lens surface requires additional cleaning, use a clean, fine-fiber or
micro-fiber cloth, dampened with a mild, soapy water solution. Gently wipe
surface of lens to remove smudges and debris.
3. Dry with an absorbent, clean fine-fiber or micro-fiber cloth.
Minor smudges and dirt should not significantly affect the performance
of the Product. However, large scratches or the removal of the
protective coating on the infrared lens can affect both image quality
and the temperature measurement accuracy.
26
 Warning
 Caution
Note