Rechargeable Battery - Fluke VT02 User Manual

VT02, VT04A, VT04
Users Manual

Rechargeable Battery

The VT04 has a rechargeable Li-ion battery.
New batteries are not fully charged. Two to ten normal
charging/discharging cycles may be required before the battery
charges to its maximum capacity.
Before using the VT04 for the first time, charge the battery:
1. Plug the ac power supply into an ac wall outlet.
2. Connect the micro-USB connector to the VT04. See Figure 2.
While the battery is charging,
LED is red. When charged,
is green. The typical charge time from 100 % discharged to 100 % charged
is 5 to 6 hours.
Make sure the Product is near room temperature before you connect it
to the charger. See the charging temperature specification. Do not
charge in hot or cold places. Charging in extreme temperatures
reduces the battery pack's ability to hold a charge.
Use the micro SD memory card to download images from the Product
to a PC. The micro-USB cable is for battery charging only.
6
Note
shows on the display and the status
shows on the display and the status LED
Note
Figure 2. Rechargeable Battery
Note
hak18.eps