67 MAX
Calibration Manual
Maintenance
Change the Battery
To install or change the AA IEC LR6 battery, open the battery compartment and replace the
battery as shown in Figure 1. Battery should be replaced when the low-battery indicator appears.
•
Dispose of battery when low battery is indicated or when the unit dies.
•
Do not dispose of this Product or product battery as unsorted municipal waste.
Clean the Product
Use 70 % isopropyl alcohol on a sponge or soft cloth to clean the Product case. A swab may be
used to clean the IR lens. See Figure 1.
4
Do not submerge the Product.
Figure 1. Change the Battery and Clean the Product
WCaution