Capture And Save - Fluke VT02 User Manual

VT02, VT04A, VT04
Users Manual

Capture and Save

The Product saves up to 10,000 images/GB on the micro SD memory card.
Use the micro SD memory card to download images from the Product
to a PC. The micro-USB cable is for battery charging only.
To capture the image and save it to memory:
1. Point the Product at the object or area of interest.
2. Pull the trigger to capture the image.
The image remains frozen for about 4 seconds. Next, a dialog box prompts
you to save or discard the image.
3. Push  to save or  to discard the image.
The display has an icon that shows the current status of the micro SD memory
card, see Figure 5.
1
Figure 5. Micro SD Memory Card Warning Icons
 No Micro SD Memory Card in slot
 Micro SD Memory Card error
 Micro SD Memory Card empty
 Micro SD Memory Card full
A routine file back-up procedure is recommended for the micro SD
memory card to store these files in a safe location.
10
Note
2
Note
3 4
hak02.eps