Function + S. Sql; Menus; Select Lcd Color - Uniden BearTracker 885 Owner's Manual

3. When all digits are selected, press MENU/OK; the radio sounds a
confirmation tone and returns to a normal display.

Function + S. SQL

Select between 3 squelch levels for scanner signals.
1. In CB mode, press FUNC|MIC-GAIN and then press HOLD/SCAN|S.
SQL. S-SQL and the current scanner squelch level (L1 - L3) display.
2. Turn the channel selector knob to adjust the squelch level.
3. Press the MENU/OK knob to save the setting and exit Menus.

MENUS

Access menus by pressing MENU/OK. The menu options, in order, are:
ƒ D-COLOR - LCD color (Day)
ƒ D-CONTRAST - LCD Contrast 0-15 (Day)
ƒ D-BRIGHT - Brightness (Day)
The Night LCD Color, Contrast, and Brightness settings display
after Brightness for Day LCD is set.
ƒ N-COLOR - LCD color (Night)
ƒ N-CONT - LCD Contrast 0-15 (Night)
ƒ N-BRIGHT - Brightness (Night)
ƒ WXSCAN - Weather Alert Scan
ƒ BWS ALERT - Set BearTracker Warning System alert volume
ƒ AUDIO PRIORITY - Incoming signal priority
Press any other key to exit.

Select LCD Color

1. Press MENU/OK to access the menus. D-COLO displays with D for
Day settings.
2. Turn Channel Selector to cycle through the available LCD colors.
The selection number for that color displays in that color. The
available colors are:
Option No: Color
1 Blue
2 Green
Option No:
5
6
E-23
Color
Magenta
Yellow