Function + Day/Night; Function + Avoid; Function + Zip - Uniden BearTracker 885 Owner's Manual

5. Turn the Talkback volume level to 0 to not hear yourself through the
CB's speaker.

Function + DAY/NIGHT

DAY/NIGHT lets you change between day and night LCD settings.
1. Press FUNC|MIC-GAIN and then press 9/19|DAY/NIGHT keys. The
LCD display changes from Day to Night, or from Night to Day.
2. Press the keys again to switch again. The radio sounds a
confirmation tone and returns to a normal display.
Change the LCD settings through the menus, beginning on
page 24.

Function + AVOID

The AVOID key lets you temporarily skip channels you don't want to hear
while scanning.
The Avoid list clears when the radio is turned off.
1. While the radio is scanning and it stops on a channel you
do not want to hear, press FUNC|MIC-GAIN and then press
S.MUTE|AVOID.
2. When the radio resumes scanning, it will skip that channel.

Function + ZIP

ZIP lets you enter a ZIP or postal code and receive transmissions from
that area.
If you have a GPS receiver installed, the radio will use the GPS
location instead of the zip code/postal code.
1. In CB mode, press FUNC|MIC-GAIN and then press BWS|ZIP keys.
Five zeroes display, with the first zero blinking.
2. Turn the channel selector knob. The first 9 characters are 0-9,
the next 26 characters are alpha A-Z. If you select a number, all
5 digits remain on the display for a US zipcode. If you select an
alpha characters, 3 digits display for the first 3 characters of a
Canadian postal code. Press MENU/OK as each digit is selected.
E-22