Preventive Maintenance; Maintenance; Troubleshooting - Uniden BearTracker 885 Owner's Manual

database is being updated. When the update is complete, SCAN
displays.

PREVENTIVE MAINTENANCE

Every six months:
1. Check the SWR.
2. Be sure all electrical connections are tight.
3. Inspect antenna coaxial cable for wear or breaks in shielding.
4. Be sure all screws and mounting hardware are tight.

MAINTENANCE

The BearTracker 885 is designed to give you years of trouble-free service.
There are no user-serviceable parts inside. It requires no maintenance
except replacing the inline fuse in the fuse holder of the DC power cord.
To replace a blown fuse:
1. Press ends of the fuse holder together. Twist to open. Carefully
separate the two pieces.
2. Remove the fuse and inspect. If blown, replace with the same
type 6-amp fuse.
Use only the fuse specified for your BearTracker 885. Failure to
do so may void your warranty.

TROUBLESHOOTING

In the event of system malfunction, perform the following procedures:
Problem
Unit does not power up
No reception
Suggestion
Check power cord connections.
Check fuse.
Check vehicle electrical system.
Check microphone connection.
Set CB/PA to CB.
Check VOLUME and SQUELCH.
Check antenna.
Check antenna connection.
Adjust RF Gain.
E-28