Set Bws Alert; Set Audio Priority; Set Tone - Uniden BearTracker 885 Owner's Manual

Set BWS Alert

The BearTracker Warning System (see page 17) activates when it
detects nearby (up to 3 - 5 miles) public safety transmissions (Police, Fire,
etc.). Set the alert volume level with this menu option.
1. In Menu mode, press MENU/OK several times until BWS ALT
displays.
2. Turn Channel Selector to select an alert volume level (L1 - L3).
3. Press MENU/OK when you have selected an option. The next
menu option displays.

Set Audio Priority

Audio Priority sets the audio priorities when you receive both CB and
Scanner audio at the same time. For example, if you have Scanner set to
Priority and you are in CB mode, you will only hear the Scanner audio.
1. In Menu mode, press MENU/OK several times until AUDPRI
displays.
2. Turn Channel Selector to select CB (CB), Scanner (SC), or No
Priority (--) for priority.
If -- is selected, both CB and Scanner signals will play at the
same time.
3. Press MENU/OK when you have selected an option. The next
menu option displays.

Set Tone

Turn TONE on for keys to sound a tone when pressed, or off for them to
be silent.
1. In Menu mode, press MENU/OK several times until TONE displays.
2. Turn Channel Selector to select on (ON) or off (OF).
3. Press MENU/OK when you have selected an option. The main
screen displays again.
E-25