Master Cylinder Removal - Polaris PREDATOR 2003 Service Manual

MASTER CYLINDER
REMOVAL
1. Clean master cylinder and reservoir assembly.
Make sure you have a clean work area to
disassemble brake components.
2. Place a shop towel under brake line connection at
master cylinder. Loosen banjo bolt (A); remove
bolt and sealing washers.
CAUTION:
Brake fluid will damage finished surfaces. Do not
allow brake fluid to come in contact with finished
surfaces.
3. Loosen the master cylinder clamp bolts (B) on the
handlebar side of the master cylinder.
4. Remove master cylinder from handlebars.
B
A
25 in.lbs.
(3 Nm)
Front Brake Lines
Brake Handle
Line Retainer
Master Cylinder Assembly
Sight Glass
Cover
45 in.lbs. (5 Nm)
Clamp
Bolts
Master Cylinder
Piston Assy
BRAKES
Brake Lines
Banjo Bolt
Caliper
Diaphragm
6.7