Using The Projector Help Displays - Epson BrightLink 697Ui User Manual

Wireless full hd 3lcd ultra short-throw interactive display

Hide thumbs Also See for BrightLink 697Ui:

Table of Contents

Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and

contact Epson for help.

Parent topic:

Related references

Projector Setup Settings - Extended Menu

Using the Projector Help Displays

You can display information to help you solve common problems using the projector's Help system.

1. Turn on the projector.

2. Press the Home button on the projector or the remote control.

3. Press the arrow buttons to select the

4. Select Display the Help menu.

5. Press Enter.

You see the Help menu.

Status light

Lamp light Temp light

Flashing blue

Solving Problems

Status and solution

Obstacle detection error. A beep

sounds, and the message "For safety

purposes remove any obstacles

blocking the lens." is displayed. The

projector turns off automatically if no

action is taken.

• Make sure that there are no

obstacles interfering with the

projection window. Remove any

• Clean the obstacle sensor if there

are no obstacles.

If the problem persists, turn the

projector off, unplug it, and contact

Epson for help

Help icon and press Enter.