Epson BrightLink 697Ui User Manual page 163

Wireless full hd 3lcd ultra short-throw interactive display

Hide thumbs Also See for BrightLink 697Ui:

Table of Contents

1. Hold down the Freeze button on the remote control for about five seconds or until you see this

2. Press the down arrow to select Password and press Enter.

You see the prompt "Change the password?".

3. Select Yes and press Enter.

4. Press and hold down the Num button on the remote control and use the numeric buttons to set a

four-digit password.

The password displays as **** as you enter it. Then you see the confirmation prompt.

5. Enter the password again.

You see the message "Password accepted."

6. Press Esc to return to the menu.