Entering A Password To Use The Projector - Epson BrightLink 697Ui User Manual

Wireless full hd 3lcd ultra short-throw interactive display

Hide thumbs Also See for BrightLink 697Ui:

Table of Contents

Parent topic:

Entering a Password to Use the Projector

If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a

password whenever you turn on the projector.

You must enter the correct password to use the projector.

1. Press and hold down the Num button on the remote control while you enter the password using the

numeric buttons.

Note: The default password is 0000.

The password screen closes.

Password Security Types