Epson BrightLink 697Ui User Manual page 326

On/Standby Status light
light
Off Flashing blue
Flashing blue Varies
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Lamp light Temp light
Orange Off
Flashing Varies
orange
Off Flashing
orange
Flashing Flashing
orange orange
Orange Orange
Flashing Off
orange
326
Status and solution
Lamp has a problem.
• Check to see if the lamp is burned
out, broken, or installed incorrectly.
Reseat or replace the lamp as
necessary.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
Replace the lamp soon to avoid
damage. Do not continue using the
projector.
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Auto Iris error. Turn the projector off,
unplug it, and contact Epson for help.
Power error. Turn the projector off,
unplug it, and contact Epson for help.
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.