Operation - Blaupunkt PR3BK Owner's Manual

PR3BK

Operation

Power source(battery power only): Open the battery
compartment ( rear bottom side of unit),insert 2 xAA batteries
(include) into the compartment according to the engraved
negative and positive polarity symbol, then close the battery
door.
If the radio sound output is getting weak and weak, please
kindly replace the power with fresh battery due to exhaust
power.
Caution: Please do not mix up install different brand battery, or
old and new battery together; Please take out the battery in
case of no operation in a long time; please disposal the
exhausted battery in environmental friendly way;
Radio: Pull the power off and AM/FM selector to power on the
unit and select AM or FM band;
adjust the frequency by using the tuning knob in order to get
radio station; adjust the output sound level by using the
volume knob.
Headphone: You can connect the headphone (not include) with
the 3.5mm stereo phone jack for listening, and the loudspeaker
will mute.
Better reception: For better radio reception, you can try to
move the radio next window; full extent the telescopic antenna;
try to adjust the frequency by tuning knob;
Specification
FM frequency:
AM frequency:
Power Output:
Power source:
Power consumption:
Standby power consumption:
(The above spec may update without prior notice)
87.5~108MHz
522~1620KHz
0.5W RMS
DC 3V (2 x 1.5V AA battery)
0.18W
<0.5W
4