EBN Technology X-POS950 Service Manual page 10

12. Unplug: A. Speaker connector, B. COM 3 connector, C. touch cable
connector, D: (left to right) COM 6 connector, LVDS and LED indicator
connector, and inverter connector. à11. Unplug: A. Speaker connector, B.
MSR Extender connector, C. touch cable connector, D: (left to right) VFD
Extender connector, LVDS and LED indicator connector, and E. inverter
connector.
.
13. Un-tighten the five screws, and then you can remove the mainboard.
Chapter 3
7