Oki ML5520 User Manual page 55

3. Unpack the new ribbon cartridge and install it.
Do not remove the ribbon shield (1) from the ribbon!
4. Turn the take-up knob (1) in the direction of the arrow to take up any ribbon slack.
5. Close the access cover and turn the printer back on.
> If ribbon should contact the eyes: Flush eyes with large
quantities of water for 15 minutes, keeping eyelids open with
fingers. Seek medical attention.
> If ribbon should contact the skin: Wash thoroughly with soap and
water.
1
CAUTION!
Maintenance > 55
1