P
RINTER RESET
1
Clearing some error conditions requires that you reset (reinitialise) the printer. To do this:
1.
Press and release SEL (1) to take the printer off line.
The SEL light goes out.
2.
Press and hold SHIFT (2), then press the RESET/CHARACTER PITCH key (5).
NOTE
Pressing SHIFT and RESET reinitialises the printer, but does not affect any
menu settings and does not reset the printer to the factory defaults. For
information on resetting the printer to the factory defaults, see
menu to the factory defaults" on page
C
HANGING EMULATIONS
Make sure paper is loaded.
1.
Press and hold SHIFT (2), then press SEL (1).
2.
Press LF(3).
The following line will print:
Printer Control
3.
Press TEAR (4) repeatedly until the emulation you wish to select prints in the
right-hand column.
4.
Press and hold SHIFT (2), then press SEL (1) to save your setting and exit the Menu
Mode.
3
2
4
Emulation Mode
Using your printer > 40
5
41.
IBM PPR
(ML5520ECO/ML5521ECO)
EPSON LQ (ML5590ECO/ML5591ECO)
"Resetting the