Advertisement
3.
3.
The Main Unit
Following steps are for TM50A-5B-VR/VU and WTM50A-5B-VR/VU:
1. Loosen and remove the eight screws in blue circles as shown below by
#1 Phillips screwdriver and then remove the rear panel from the LCD
assembly.
2. Loosen and remove the four screws in blue circles as shown below by
#1 Phillips screwdriver.
3. Loosen and remove the eight hexagonal bolts fixing COM port and the
VGA port in the blue rectangle by hexagon socket spanner and then
remove the EMI cover
4
Chapter 3
Advertisement
