Odometer/Trip Computer; Speedometer; Instrument Panel Illumination; Brightness Adjustment - Fiat 124 SPIDER 2017 Owner's Manual

Odometer / Trip
Computer
The display mode can be changed from
odometer to "Trip computer A" to "Trip
computer B" and then back to
odometer by pushing the selector while
one of them is displayed.
The selected mode will be displayed.
05020102-121-001
Spider Instrument Cluster
1 — Trip Selector/Reset Button
When the ignition is placed in the ACC
or OFF position, the odometer or trip
cannot be displayed. Pushing the
selector can switch the trip or reset it
for a ten-minute period in the following
cases:
After the ignition is cycled to OFF
from ON.
After the driver's door is opened.
Odometer
The odometer records the total
distance the vehicle has been driven.
Trip Computer
The trip computer can record the total
distance of two trips. One is recorded in
"Trip A", and the other is recorded in
"Trip B".
For instance, "Trip A" can record the
distance from the point of origin, and
"Trip B" can record the distance from
where the fuel tank is filled.
When "Trip A" is selected, pushing the
selector again within one second will
change to "Trip B" mode. When "Trip A"
is selected, TRIP A will be displayed.
When "Trip B" is selected, TRIP B will
be displayed.
The trip computer records the total
distance the vehicle is driven until the
meter is again reset. Return it to "0.0"
by depressing and holding the selector
for one second or more.
Use this meter to measure trip
distances and to compute fuel
consumption.
Versions With Fiat Connect 7.0: if
the fuel economy data is reset using the
fuel economy monitor or Trip A is reset
using the trip meter, the fuel economy
data and Trip A are reset simultaneously
when the fuel economy monitor with
the trip meter is on, .
Note: Only the trip records tenths of
miles (kilometers).
Trip Computer Reset
The trip computer will be erased when:
The power supply is interrupted
(blown fuse or the battery is
disconnected).
The vehicle is driven over
9999.9 miles.

Speedometer

The speedometer indicates the speed
of the vehicle.
Instrument Panel
Illumination
When the position lights are turned on
with the ignition switched ON, the
brightness of the instrument panel
illumination is dimmed. When the
position lights are turned on,
the warning light in the instrument
cluster turns on (see "Headlights" in
"Getting To Know Your Vehicle"
chapter).

Brightness Adjustment

The brightness of the instrument panel
and dashboard illuminations can be
adjusted by rotating the knob:
The brightness decreases by
rotating the knob to the left. A beep
sound will be heard when the knob has
been rotated to the maximum dim
position.
79