Side Marker Housing; License Plate Lights - Fiat 124 SPIDER 2017 Owner's Manual

Side Marker Housing

2 — Socket and Bulb Assembly
3. Install the new bulb and then
reinstall the socket in the reverse order
of the removal procedure.
194

License Plate Lights

Proceed as follows:
1. Make sure the ignition is placed in
the OFF mode, and the headlight
switch is off.
2. Slide the unit as shown in the figure
to remove it.
08070606-123-100
1 — License Plate Light Assembly
GUID-07031501220001
Trunk Lid
3. Turn the socket and bulb assembly
counterclockwise and remove, remove
bulb.
License Plate Light Housing
2 — Socket and Bulb Assembly
4. Install the new bulb in the reverse
order of the removal procedure. Insert
catch and push the housing back into
place.
07031501-221-001