Native Instruments AUDIO 8 DJ Operation Manual page 9

4. Hard- and Software Installation
This chapter addresses the installation of the drivers of the AUDIO 8 DJ as well as
the installation of the helping applications Control Panel and Settings Tool.
Please follow the provided step-by-step instructions! Ignoring the instructions
below may result in the installation of wrong drivers and can potentially cause
problems.
4.1 Installation of the AUDIO 8 DJ
Before you can use the AUDIO 8 DJ, you need to install its driver first. The driver
handles communication between the AUDIO 8 DJ hardware and your computer.
You can configure the driver's settings using the Settings Tool. This tool and its
options are explained in chapter 7 (AUDIO 8 DJ Software).
4.1.1 Installation of the AUDIO 8 DJ Drivers on Windows
This section describes the installation and the uninstall process of the AUDIO 8
DJ Drivers on a Windows PC.
Installing the AUDIO 8 DJ Drivers
►
Place the installation CD in the CD-ROM drive of your computer.
►
Use the Windows Explorer to browse the contents of the CD.
►
Double-click on Audio 8 DJ Driver
program, which will show a welcoming screen first.
►
Click on N to proceed in the driver installation.
ext
►
In the next step, click on A
Setup. This will start the driver installation
to accept the software license agreement.
ccept
! !
D o not connect the D o not connect the
AUDIO 8 DJ hardware AUDIO 8 DJ hardware
until the driver installer prompts until the driver installer prompts
you as the operating system may you as the operating system may
install the wrong drivers! install the wrong drivers!
AUDIO 8 DJ – 9