Native Instruments AUDIO 8 DJ Operation Manual page 41

11.2 How to check if the AUDIO 8 DJ driver is installed
correctly
11.2.1 How to check if the AUDIO 8 DJ driver is installed correctly in
Windows
Open "Start" > "All Programs" > "Native Instruments" > "Audio 8 DJ Driver".
There you will find the helper applications Control Panel and Settings Tool. Make
sure that the device is connected to the computer and open the Control Panel. If
all the drop-down menus are greyed out (i.e., there are no presets in the preset
drop-down list, no sample rate values to choose from) there must be something
wrong with the connection. If the "AUDIO 8 DJ Driver" entry in the NATIVE
INSTRUMENTS folder of the "Start" menu is missing, the driver is most probably
not installed at all.
►
If the driver is not installed, you can install it using the setup program as de-
scribed in chapter .1 (Installation of the AUDIO 8 DJ).
►
If the driver is not recognized, check your USB 2.0 connection as described in
chapter 11.3 (USB Troubleshooting).
As for any other USB device, the driver installs exactly for one USB port. If you
connect the AUDIO 8 DJ to another port for the first time, a standard Windows
dialog opens in which you can install the driver to that new port.
►
If you have previously installed the driver on your computer once, Windows will
find the right drivers itself.
►
If you did not install the drivers on your computer, Windows will try to install
the wrong drivers.
►
If you do not know whether or not you have previously installed the drivers of
the AUDIO 8 DJ to your computer, you should start the setup program for the
AUDIO 8 DJ – 1