F10 Setting Of Security Code; [F10] Setting Of Security Code - SMC Networks ZSE80(F) Operation Manual

■[F10] Setting of security code

Security code can be entered during the key-lock is released.
<Operation>
Press the or
Setting of security code
[Pin] and set value are displayed in turn.
Press the or
If the security code is used, it is necessary to input the security code to release the key lock.
The security code can be set optionally by the operator.
Default setting is "000".
Refer to page 42 when the security code is used.
button in function selection mode to display [F10].
Press the button.
button to select security code.
Press the button to set.
Setting of [F10] security code completed
Move on to setting of security code.
Return to function selection mode.
-37-
PS##-OMM0003-A