F9 Setting Of Power Saving Mode; [F 9] Setting Of Power Saving Mode - SMC Networks ZSE80(F) Operation Manual

■[F 9] Setting of power saving mode

Power saving mode is selectable.
When the Pressure switch is left for 30 seconds without any operation, it is shifted to power saving mode.
(The decimal point and indication light (only with the switch output ON) flash during the operation.)
<Operation>
Press the or
Setting of power saving mode
[ECo] and set value are displayed in turn.
Press the or
In power saving mode, a key operation returns to normal display, and if there is no key operation for
30 seconds, the display enters power saving mode. (only in measurement mode).
On the display in power saving mode, only decimal points and indicator
lights flash as shown in the right figure (only with the Pressure switch on).
∗: The indicator light also flashes with the Pressure switch, but it is not simultaneous to output.
button in function selection mode to display [F 9].
Press the button.
button to select power saving mode.
Press the button to set.
Setting of [F 9] power saving mode completed
Move on to setting of power saving mode.
Return to function selection mode.
-36-
PS##-OMM0003-A