■[F 5] Setting of display resolution
This function is to change the pressure display digit.
The flickering on the display can be eliminated.
<Operation>
Press the
or
Setting of display resolution
Press the
or
∗: Not selectable depending on selected pressure unit.
The display resolution selectable unit is MPa (only for ISE), kPa (only for ZSE), bar and psi.
("bar" and "psi" are selectable only for models with the unit conversion function.
25.)
button in function selection mode to display [F 5].
Press the
button.
button to select display resolution.
Press the
button to set.
Setting of [F 5] display resolution completed
Move on to setting of display resolution.
Return to function selection mode.
See [F 0] Unit conversion function on page
-32-
PS##-OMM0003-A