ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
Wall-Mount the Switch
To wall-mount the switch:
1.
Peel the plastic cover off the adhesive squares on the rear of the backplate.
The adhesive helps hold the backplate in place when you are mounting the switch.
2.
Wall-mount the backplate.
Wall mount to stud (or solid surface)
3.
Use either a vertical rear mount or a vertical side mount for the switch.
Vertical rear mount
Note: You must
screw the backplate
into a wall stud.
OR
b
OR
a
Installation
Dry wall mount (using anchors)
b
a
Vertical side mount
14
Note: Fold wings
in before inserting
the anchor into a wall.