Step 4: Install The Switch; Wall-Mount The Switch - NETGEAR GS408EPP Hardware Installation Manual

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

Step 4: Install the Switch

You can install the switch on a wall or in a standard 19-inch (48.26-centimeter) network
equipment rack.

Wall-Mount the Switch

The switch ships with a mount to which you can click-attach the back or bottom of the switch.

To mount the switch to a wall:
1. Place the mount on the wall where you want to mount the switch.
2. Mark the wall where the two mounting holes are.
3. Attach the mount to the wall using the
M4 x L25 mm screws provided in the package.
4. Tighten the screws with a No. 2 Phillips screwdriver to secure the mount.
5. Line up the back or bottom of the switch with the mount.
6. Insert the mount's locking tab and hook into the notches on the back or bottom of the switch.
7. Slide the switch into the mount.
Installation
15