Gss108Epp 8-Port With Poe+ Switch Hardware - NETGEAR GSS108E Hardware Installation Manual

ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
The rear panel includes a Factory Reset button.
Figure 5. GSS116E switch rear panel

GSS108EPP 8-Port With PoE+ Switch Hardware

The front panel includes Ethernet ports with LEDs and the power connector.
Figure 6. GSS108EPP switch front panel
Table 3. GSS108EPP 8-port switch LEDs
LED
Power
Speed and Activity
(Left LED on ports 1–8)
PoE
(Right LED on ports 1–4)
PoE Max.
Description
• On. The switch is receiving power.
• Off. The switch is not receiving power.
• Solid green. 1000 Mbps link on this port.
• Blinking green. Activity on the 1000 Mpbs link on this port.
• Solid amber. 100 or 10 Mpbs link on this port.
• Blinking amber. Activity on the 100 or 10 Mpbs link on this port.
• Off. No link on this port.
• Solid green. PoE is in use on this port.
• Solid amber. PoE is halted on this port.
• Off. PoE is not in use on this port.
• Solid amber. Less than 7W of PoE power is available.
• Blinking amber. The PoE Max LED was active in the previous two minutes.
• Off. The PoE ports are working normally.
Hardware
11
Factory Reset button