Shelving Installation; Operation; Electronic Control - Fagor QR-1 Installation, Use And Maintenance Manual

REACH-INS OPERATIONAL SERVICE MANUAL / Rev.JUN. 2015
installation.
3.7

SHELVING INSTALLATION

Hook shelf rails onto shelf pilasters
Position all shelf rails equal in distance from the floor for level shelves
Wire shelves are oriented so that cross support bars are facing down
Note: Single door Reach-in include an air flow guard on the rear of the shelves as well as a lip to
maintain an air space at the rear of the cabinet
Place shelves on shelf clips, making sure all corners are seated properly
4

OPERATION

4.1

ELECTRONIC CONTROL

After connecting your unit, turn ON rocker switch located next to the controller. The display will light
up showing the temperature inside the unit. Also, the compressor and fan icons will flash for a period
of three minutes. After this delay the unit will start cooling.
Compressor Icon
Evaporator Fan Icon
Temperature inside the cabinet
Verify you don't have any alarms on the temperature controller. If after you turn ON the equipment
the controller shows the alarm icon or an error code, call f o r technical service. They will help you fix
the problem.
Note: The controller on the equipment is programmed to display internal temperatures in Fahrenheit (°F). To change to
Celsius (°C), see point 4.2
www.Fagorcommercial.com
PAGE 10