Programming The Memory Feature; Linking And Unlinking The Remote Keyless Entry Key Fob To Memory - Dodge DURANGO 2017 Owner's Manual

• The memory position (1) and memory position (2)
buttons which are used to recall either of two pre-
programmed memory profiles.
Memory Seat Switch

Programming The Memory Feature

NOTE: To create a new memory profile, perform the
following:
1. Cycle the vehicle's ignition to the ON/RUN position
(Do not start the engine).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135
2. Adjust all memory profile settings to desired prefer-
ences (i.e., seat, side mirror, power tilt and telescopic
steering column [if equipped], and radio station pre-
sets).
3. Push and release the set (S) button on the memory
switch.
4. Within five seconds, push and release either of the
memory position buttons (1) or (2). The instrument
cluster display will show which memory position has
been set.
NOTE:
• Memory profiles can be set without the vehicle in PARK,
but the vehicle must be in PARK to recall a memory
profile.
• To set a memory profile to your key fob, refer to
"Linking And Unlinking The Remote Keyless Entry Key
Fob To Memory" in this section.
Linking And Unlinking The Remote Keyless Entry
Key Fob To Memory
Your key fobs can be programmed to recall one of two
pre-programmed memory profiles by pushing the unlock
button on the key fob.
3