Replacing The Remote Control Batteries; Headphones Operation - Dodge DURANGO 2017 Owner's Manual

Hide thumbs Also See for DURANGO 2017:

Table of Contents

— Push and hold to fast rewind through the

current audio track or video chapter.

— Mutes headphone audio.

15. BACK — Push to exit out of menus or return to source

selection screen.

— Push to navigate menus.

17. OK — Push to select the highlighted option in a menu.

— Push to navigate menus.

— Push to navigate menus.

Replacing The Remote Control Batteries

The remote control requires two AAA batteries for opera-

tion. To replace the batteries:

1. Locate the battery compartment on the back of the

remote, then slide the battery cover downward.

2. Replace the batteries, making sure to orient them ac-

cording to the polarity diagram shown.

3. Replace the battery compartment cover.

UNDERSTANDING YOUR INSTRUMENT PANEL 329

The headphones receive two separate channels of audio

using an infrared transmitter from the video screen.

If no audio is heard after increasing the volume control,

verify that the screen is turned on, the channel is not muted

and the headphone channel selector switch is on the

desired channel. If audio is still not heard, check that fully

charged batteries are installed in the headphones.

Rear Seat Entertainment Headphones

1 — Power Button

2 — Volume Control

3 — Channel Selection Switch

Table of Contents