Table of Contents
Advertisement
To Manually Turn Off The Stop/Start System
STOP/START Off Switch
1. Push the STOP/START OFF switch (located on the
switch bank). The light on the switch will illuminate.
2. The "STOP/START OFF" message will appear in instru-
ment cluster display within the Stop/Start section. Refer
to "Instrument Cluster" in "Understanding Your Instru-
ment Panel" for further information.
3. At the next vehicle stop (after turning off the STOP/
START system), the engine will not be stopped.
4. The STOP/START system will reset itself back to an ON
condition every time the ignition is turned off and back
on.
To Manually Turn On The Stop/Start System
Push the STOP/START OFF switch (located on the switch
bank). The light on the switch will turn off.
System Malfunction
If there is a malfunction in the STOP/START system, the
system will not shut down the engine. A "SERVICE STOP/
START SYSTEM" message will appear in the instrument
cluster display within the Stop/Start section. Refer to
"Instrument Cluster" in "Understanding Your Instrument
Panel" for further information.
If the "SERVICE STOP/START SYSTEM" message appears
in the instrument cluster display, have the system checked
by your authorized dealer.
ENGINE BLOCK HEATER — IF EQUIPPED
The engine block heater warms the engine, and permits
quicker starts in cold weather. Connect the cord to a
standard 110-115 Volt AC electrical outlet with a grounded,
three-wire extension cord.
STARTING AND OPERATING 389
5
Advertisement
Chapters
Table of Contents
