Easy Entry/Exit Seat - Dodge DURANGO 2017 Owner's Manual

A recall can be cancelled by pushing any of the memory
buttons during a recall (S, 1, or 2). When a recall is
cancelled, the driver's seat and steering column (if
equipped) stop moving. A delay of one second will occur
before another recall can be selected.

Easy Entry/Exit Seat

This feature provides automatic driver's seat positioning to
enhance driver mobility when entering and exiting the
vehicle.
The distance the driver's seat moves depends on where
you have the driver's seat positioned when you cycle the
vehicle's ignition to the OFF position.
• When you cycle the vehicle's ignition to the OFF posi-
tion, the driver's seat will move about 2.4 inches
(60 mm) rearward if the driver's seat position is greater
than or equal to 2.7 inches (67.7 mm) forward of the rear
stop. The seat will return to its previously set position
when you cycle the vehicle's ignition to the ACC or RUN
position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137
• The Easy Entry/Easy Exit feature is disabled when the
driver seat position is less than 0.9 of an inch (22.7 mm)
forward of the rear stop. At this position, there is no
benefit to the driver by moving the seat for Easy Exit or
Easy Entry.
Each stored memory setting will have an associated Easy
Entry and Easy Exit position.
NOTE: The Easy Entry/Exit feature is not enabled when
the vehicle is delivered from the factory. The Easy Entry/
Exit feature is enabled (or later disabled) through the
programmable features in the Uconnect system. Refer to
"Uconnect Settings/Customer Programmable Features" in
"Understanding Your Instrument Panel" for further infor-
mation.
3