Specifications - Brother BAS-326H-484 Instruction Manual

2. SPECIFICATIONS

2. SPECIFICATIONS
Sewing machine
Stitch formation
Max. sewing speed
Max. sewing area (XxY)
Feed mechanism
Stitch length
Maximum No. of stitches
No. of sewing data items
that can be stored
Work clamp lift method
Work clamp height
Intermittent presser foot lift
amount
Intermittent presser foot
stroke
Hook
Wiper device
Thread trimmer
Thread take-up device
Cycle programs
Motor
Weights
Power source
Air pressure
(*1) The number of data items and stitches that can be stored will vary depending on the number of stitches in each
program.
No guarantees of operation can be given for any media.
(*2) Only applicable to -484 SF specifications.
2
Lock stitch pattern tacking sewing machine
Intermittent feed, pulse motor drive
999 (Internal memory, SD card, USB memory) (*1)
2 − 4.5 mm, 4.5 − 10 mm or 0 (Default setting 3 mm) (*2)
Machine head Approx. 88 kg, LCD panel Approx. 0.8 kg
Control box 9 kg (Differs depending on destination)
Single-phase 110V / 220V / 230V, 3-phase 220V / 380V / 400V
(For single-phase 110 V and three-phase 380 V/400 V, the trans box is required.)
BAS-326H-484, BAS-326H-484 SF
With intermittent presser foot
Single needle lock stitch
2,200 sti/min
220 x 100 mm
0.05 − 12.7 mm
20,000 stitches (per program)
Pneumatic cylinder method
Separate-type work clamp
Max. 27.5 mm
19.5 mm (*2)
Treble hook
Standard equipment
Standard equipment
Standard equipment
30
550 W AC servo motor
0.5 MPa 1.8 l/min.
3714B