Sewing - Brother BAS-326H-484 Instruction Manual

5. SEWING

5. SEWING
Do not allow any liquids to get onto this sewing machine, otherwise fire, electric shocks or operating problems may
occur.
If any liquid gets inside the sewing machine (machine head or control box), immediately turn off the power and
disconnect the power plug from the electrical outlet, and then contact the place of purchase or a qualified
technician.
Turn off the power switch at the following times.
If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result.
• When replacing the bobbin and needle
• When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in
personal injury or damage to the machine.
5-1. Sewing
30
WARNING
CAUTION
1. Turn on the power.
2. Touch the △ or ▽ key to select the number for the
program to be sewn.
* For details on reading sewing data from SD cards and
USB memory devices, refer to "3-4. Importing items of
sewing data separately" in the LCD Panel/Operation
Panel" Instruction Manual.
3. Lower the work clamps (2) and the depress the start
switch (1).
Home position detection will be carried out.
4. Place the materials under the work clamps (2).
5. Depress the work clamp switch (3).
The work clamps (2) will be lowered.
6. Depress the start switch (1).
The sewing machine will start sewing.
7. After sewing is completed, the thread trimmer will
operate. And then the work clamps (2) will be raised.
Use work clamps which will hold the material securely
so that it does not slip. If the material slips when using
3551B
the standard work clamps and feed plate, process
them so that the material does not slip.
3707B
BAS-326H-484, BAS-326H-484 SF