Appendix E: Ati6 Disconnect Reasons - US Robotics USR3520 User Manual

Appendix E: ATI6 Disconnect Reasons

1. None
No connection has been made since reset, or in Remote Command Mode while still connected.
2. DTR dropped
DTR was de-asserted by the local DTE on the RS-232 interface.
3. Escape Code
Escape Code (default='+++') was issued by the local DTE.
4. Loss of Carrier
Gateway or analog modem de-asserted DCD.
5. Inactivity Timeout
Local or remote Modemulator disconnected due to data inactivity.
6. DISC Received
Remote Modemulator disconnected (unspecified reason).
7. Link Timeout
Local Modemulator disconnected due to network latency.
8. Keypress Abort
A key was pressed during connection handshake.
9. Refused
Caller ID failed authentication at the Listener end.
Modemulator User Guide
Page 86 of 113