Configure Modemulator Dialing Directory - US Robotics USR3520 User Manual

Modemulator & 3g m2m cellular gateway
Hide thumbs Also See for USR3520:
Table of Contents

Advertisement

4. Click on the "Interfaces" tab on the top menu bar and select 3G connection.
5. In the "General" section, select the radio firmware for the wireless service provider that you are
using. Click "Save changes".
6. Verify/Update the gateway APN to match the network APN provided by the MVNO.
For GSM wireless service:
The network settings will populate automatically for many SIM cards. Check the settings of
the APN, Username, Password, and International Roaming. Update if necessary.
Click "Save changes".
For CDMA service:
For both Verizon Wireless and Sprint services the activation will occur automatically.
Click on the "Home" tab on the top menu bar.
Connection to the network will be setup automatically.
7. Disconnect the Ethernet cable.

Configure Modemulator Dialing Directory

The Modemulator makes a peer-to-peer connection to another Modemulator, which emulates a
dial-up modem connecting to another dial-up modem. In both cases, the calling device has to
know the "number" of the answering device.
For an M2M system based on dial-up modems and PSTN networks, the telephone service provider
assigns a phone number to the destination, and the User (or software application) commands the
calling modem to dial the phone number of the destination modem.
For an M2M system based on Modemulators and cellular networks, the MVNO that provides the
cellular data service will assign a static IP address to each device (CDMA) or SIM (GSM) on the
account. That IP address is the "number" that the calling device must know.
In order for the Modemulator to be a drop-in replacement for dial-up modems, it has to accept a
command to dial a PSTN phone number, but translate that number into the IP address of the
destination Modemulator. That translation is done by the Modemulator dialing directory.
Modemulator User Guide
LAN to WAN routing is enabled by default. Once connected, any
Internet activity on your system will consume Cellular Data.
For configuration and more information go to
WARNING!
Page 20 of 113
Appendix B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usr803520

Table of Contents