Power Connector - US Robotics USR3520 User Manual

SAFETY WARNING
This device operates on DC power provided via a DC power supply or AC
power adapters. Only use power supplies in the range 9-33V DC and make
sure the product is installed near a power outlet that is easily accessible. This
product is regarded a class III equipment where protection against electric
shock is provided by means of power supplied from a SELV (Safety Extra
Voltage) circuit and does not generate hazardous voltages within itself.
SAFETY WARNING
When using an AC adapter make sure that the ambient temperature doesn't
exceed the specified temperature limits of the AC adapter.
As a reference, the power supply available from USRobotics has the following parameters:
 Output voltage 12V DC
 Max output current 1A
If an industrial power supply is preferred USRobotics recommends:
http://www.us.tdk-lambda.com/ftp/Specs/dspa.pdf
It can be sourced through Farnel, Mouser, Digikey, etc...

Power Connector

The power connector is a Micro-Fit connector from Molex (MX-43025-0400).
1
 Power Connector Drawing (PDF) -->
400_drawing.pdf
 Power Connector Datasheet (PDF) -->
400_datasheet.pdf
Modemulator User Guide
http://support.usr.com/support/3510/files/molex_43025-
http://support.usr.com/support/3510/files/molex_43025-
Page 67 of 113