Table of Contents
Advertisement
If the application requires LAN to WAN routing, close any programs running on the attached
computer that might be using the Internet before returning to this page to re-enable LAN to WAN.
Closing Programs
If LAN to WAN routing is left enabled during the configuration process, USR strongly recommends closing
any programs that might be using the Internet (web browsers, instant messengers, email programs, etc.)
before connecting the gateway to a cellular network. Be sure to close any programs that are running in
the background; e.g. auto updates or anti-virus. There are applications available that provide a list of
current network activity like Windows' Resource Monitor that can be used as a guideline.
Auto Provisioning
By default the gateway connects to the USR Universe each time the device is powered on, and checks for
an updated image file. The gateway will automatically download and install updates from the USR
Universe over the cellular connection. If the product is not properly registered on the USR Universe, or to
reduce cellular data usage, disable auto provisioning and manually check for updates. If auto provisioning
is turned off, USR strongly recommends checking for updates on a regular basis to manually update the
gateway when updates are available.
How to Disable Auto Provisioning
Before installing a SIM card or setting-up the carrier information, connect a computer's Ethernet port to
the gateway's Ethernet port with a standard Ethernet cable, then open a web browser on the computer
and enter the address 192.168.1.1 into the address bar. Enter the default username (admin) and
password (admin). After a successful login, the Home screen will appear.
Click on the Provisioning Tab.
To disable this feature go to Settings, then next to Enable automatic provisioning click No and click Save
Changes.
Modemulator User Guide
Page 83 of 113
Advertisement
Table of Contents
