Table of Contents
Advertisement
AT Command Reference Guide
'*' denotes command available in Remote Command Mode. (See the
Basic Commands
AT$ * Display Basic Command Help Screen:
AT$
Basic Command Help (unrecognized commands accepted & ignored)
D$
Dial
&$
Ampersand
{$
Modemulator Command Help
S$
S-Register
!!
Flash New Code
A/
Repeat Last Command
A
Manual Answer
E0
Command Echo Off
E1
Command Echo On
F0
Local Online Echo On
F1
Local Online Echo Off
H
Hang Up
OK
This command will not be forwarded to the analog modem.
A/
Repeat Last Command
This command will repeat the last AT command string attempted. If the last AT command ended in
DL, and the last number dialed was a Direct dial IP address, then "ERROR" will be displayed.
This command will not be forwarded to the analog modem.
Modemulator User Guide
Command Help
Command Help
Command Help
I1
Main Checksum
I4
RAM
Variables
I5
EEPROM Variables
I6
Link Diagnostics
I7
Product Profile
O
Return Online
Q0
Display Result Codes
Q1
Quiet Mode
V0
Numeric Result Codes
V1
Verbal
Result Codes
X0-7 Result Code Options
Z
Recall EEPROM Variables
Page 34 of 113
{R1
command)
Advertisement
Table of Contents
