Example For Configuring Remote Bridging With Ip Routing - Huawei AR3200 Series Configuration Manual - Lan

Enterprise routers
Hide thumbs Also See for AR3200 Series:
Table of Contents

Advertisement

Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN

2.8.4 Example for Configuring Remote Bridging with IP Routing

Configuring remote bridging with IP routing allows LANs in different geographical locations
and on different network segments to communicate.
Networking Requirements
Departments of Enterprise A need to communicate with other and with Enterprises C (in a
different geographical location).
Departments of Enterprise A belong to the LANs on the same network segment and can be
bridged, but Enterprise C belongs to a different network segment. As a result, link-layer bridging
cannot be used to communicate between Enterprise A and Enterprise C.
In this scenario, local bridging integrated with IP routing offers a viable solution.
As shown in
are added to different bridge groups. After Bridge-if interfaces are created and assigned IP
addresses, and the IP routing function is enabled, the two hosts of Enterprise A can communicate
with the hosts of Enterprises C.
Figure 2-11 Networking diagram of remote bridging integrated with IP routing
1.1.1.1/24 1.1.1.2/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Issue 02 (2012-03-30)
Figure
2-11, bridge groups are configured on RouterA and RouterB, and interfaces
Eth2/0/1
Eth2/0/2
User 1
User 2
Enterprise A
Configure bridge groups on RouterA and RouterB.
Add Eth 2/0/1 and Eth 2/0/2 on Router A to a bridge group so that the two hosts of Enterprise
A can communicate with each other.
Add GE 3/0/0 to another bridge group on Router A, and add GE 3/0/0 to the bridge group
on Router B.
Create Bridge-if interfaces and enable the IP routing function for the bridge groups on
Router A and Router B. This allows Enterprise A and Enterprise C to communicate with
each other.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Bridge-if
RouterA
Network
GE3/0/0
2 Transparent Bridging Configuration
RouterB
GE3/0/0
Eth2/0/0
User 4
2.1.1.4/24
Enterprise C
70

Advertisement

Table of Contents
loading

Table of Contents