Optional) Configuring Vlan Id Transparent Transmission; Checking The Configuration - Huawei AR3200 Series Configuration Manual - Lan

Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN
Step 3 Run:
bridging { ip | others } disable
The bridge group is disabled from bridging specified protocol packets.
To allow a bridge group to forward specified protocol packets, enable the function that bridges
the protocol packets on the bridge group. By default, a bridge group bridges all protocol packets.
----End

2.5.6 (Optional) Configuring VLAN ID Transparent Transmission

VLAN ID transparent transmission allows the devices in the same VLAN in different locations
to communicate with each other.
Context
By default, an outbound interface of a bridge group removes the VLAN IDs of the packets to
be sent out. After VLAN ID transparent transmission is configured on an outbound interface of
a bridge group, the outbound interface does not remove the VLAN IDs of the packets to be sent
out.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
bridge vlan-transmit enable
VLAN ID transparent transmission is enabled.
Step 4 Run:
quit
Return to the system view.
----End

2.5.7 Checking the Configuration

After configuring remote bridging, you can view the traffic statistics on a bridge group or a
specified interface in the bridge group.
Issue 02 (2012-03-30)
NOTE
l VLANIF interfaces do not support VLAN ID transparent transmission.
l It is not recommended to use the VLAN ID transparent transmission for sub-interfaces.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Transparent Bridging Configuration
51