Panel Factory Mode - Pioneer PDP-6071PU Service Manual

1

8.2.2 PANEL FACTORY MODE

Operation Items
A
This is the menu screen for the adjustment of the panel. Data acquisition and value adjustment can be performed for
the following items:
No. Indication
8.2.2.1 PANEL INFORMATION
8.2.2.2 PANEL WORKS
8.2.2.3 POWER DOWN
B
8.2.2.4 SHUT DOWN
8.2.2.5 PANEL-1 ADJ (+)
8.2.2.6 PANEL-2 ADJ (+)
8.2.2.7 PANEL REVISE (+)
8.2.2.8 ETC. (+)
8.2.2.9 RASTER MASK SETUP (+)
8.2.2.10 PATTEN MASK SETUP (+)
8.2.2.11 COMBI MASK SETUP (+)
C
D
E
F
150
1
2
Description of functions
Data, such as the version of the microcomputer of the panel, product serial number, and
statuses of memories for adjustment values for the main unit and for backup, are
displayed.
Operation data, such as accumulated pulse-meter count, accumulated hour-meter
count, accumulated power-on count, and the temperature detected by the sensor, are
displayed.
The power-down history is displayed, with the hour-meter values that indicate the hour
values when power-downs occurred.
The shutdown history is displayed, with the hour-meter values that indicate the hour
values when shutdowns occurred.
Settings of the driving pulse timing and driving voltage can be performed.
White balance and ABL (power consumption) for the panel can be set.
The level for correction of panel degradation can be set.
Copying of backup data and clearance of various data can be performed.
The mask indication (RASTER) can be set and indicated.
The mask indication (PATTERN) can be set and indicated.
The mask indication (COMBI) can be set and indicated.
PDP-6071PU
2
3
3
4
4