Cylinder Head Cover - HYOSUNG RT125D Service Manual

CYLINDER HEAD COVER

Clean off oil from the surfaces of cylinder head and
cover.
Fit the packing to the cylinder head cover
Tighten the cylinder head cover bolts with the
hexagon wrench.
Cylinder head cover : 9~10 N m (0.9~1.0 kg m)
LEFT ENGINE DISASSEMBLY
Remove the magneto rotor and key.
Rotor remover : 09930-30162
Rotor remover sliding shaft : 09930-30102
Remove the starter clutch gear.
Remove the stator screw by using the impact drive
and detach the stator.
.
ENGINE
3-22