Table of Contents
Advertisement
4
26
USAGE
DIGITAL CLOCK TIMER
WITH FULL SENSOR CONTROL
Setting the clock
After your microwave oven is first plugged in or after a
power failure, the clock will flash to indicate that the time
is not correct.
To set the current time:
2
• Touch the key .
1
The
digits
setting mode.
• Touch the keys to set the hours.
3
• Touch again the key to set the minutes.
5
The minute digits will start to flash.
• Touch the keys to set the minutes.
• To finish, touch the key again.
To reset the time:
• Touch the key for 1 second.
• Repeat the forenamed actions.
Initial mode
If any function has been chosen, but not started by
touching the
cancelled in 60 seconds.
The digital time switch clock passes in the
thus burn keys of working functions the clock setting
key , current time on the the display , keys
1
4
and
If the device is in the Initial mode more than 60 seconds
it passes in the
EN
1
2
start to flash to
show that you are in clock
3
1
3
1
1
START
button
STOP
, .
5
energy-saving mode
LOGIC CONTROL
4
, this function is
Initial mode
,
2
START
.
,
,
Advertisement
Table of Contents
