Usage - Kaiser M 250 Series User Manual

G AUTO DEFROST
M C
88:88
100 140
160 180 200
:
OO OO
2
:
2O OO
:
2O 35
NOTE: During cooking a meal, you can change the
settings: microwave power, the duration of cooking,
temperature, depending on the selected program to get
an optimal result.
NOTE: Please become familiar with the section
Practical advices.
NOTE: each time you touch a key it comes a sound
signal.

USAGE

DIGITAL CLOCK TIMER LOGIC CONTROL
WITH FULL SENSOR CONTROL
Setting the clock
3
After your microwave oven is first plugged in or after a
power failure, the clock will flash to indicate that the
current time should be set.
1
To set the current time:
• Touch the key 1.
The digits of hours 2 start to flash to show that you are in
4
clock setting mode.
• Touch the keys 3 to set the current hour.
3
The digits of hours 2 stop to flash in 4 seconds. The
minute digits 4 will start to flash.
• Touch again the keys 3 to set the minutes.
The minute digits 4 stop to flash in 4 seconds. The
current time has been set.
Energy-saving mode
If any function has been chosen, but not started by
4
touching the OK button 5, this function is cancelled in 2
minutes.
If the device is in the Initial mode more than 10 seconds
it passes in the energy-saving mode. Herewith the
clock lights weaker.
EN
26