SMC Networks HRSE018-A Operation Manual page 57

26.
Select temperature alarm monitoring method from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set value
Settings of this function and example of alarm generating timing for 5.6.3 "Setting of temperature alarm
monitoring method and generation timing".
Monitoring start timer Setting and Checking
27.
Press the [SEL] key once.
Setting screen of the monitoring start timer is displayed on the digital display.
PV
SV
28.
Select monitoring start timer from the table below with [▲] key or [▼] key, and confirm
by pressing "SEL".
Set value
HRSE Series
Table 5.6-7
Item
Continuous Alarm monitoring starts at the same
monitoring time as it is turned ON.
When
temperature is outside of the alarm
threshold range at the time of
Automatic
operation start, the alarm will not be
monitoring
generated until the temperature
comes inside the alarm threshold
range.
Alarm will not be generated until it
reaches the time set for the AS.22
Monitoring start "Monitoring start timer" after the
timer operation starts.
Alarm monitoring starts when it
reaches the set time.
Alarm will not be generated until it
reaches the time set for the AS.22
"Monitoring start timer" after the
operation starts.
Automatic
Alarm monitoring starts when it
monitoring +
reaches the set time.
Monitoring start
When
timer
temperature
threshold range before it reaches
the set time, the alarm monitoring
will be started at that time.
Table 5.6-8
Explanation
Setting and checking are impossible when "0:
Continuous monitoring" or "1: Automatic
monitoring" is selected for the setting of AS21
"Temperature alarm monitoring method".
Chapter 5 Display and setting of various functions
List of set value
Explanation
the circulating
the circulating
enters the
List of set value
(Default setting)
HRX-OM-R039
Initial value
(Default setting)
✓
fluid
fluid
alarm
Initial value
✓
5.6 Alarm customize function
5-19